Water Leak Detectors & How They Save Your Home
No matter how old or new your house is or how well it is built, there is eventually going to come a time when the plumbing fails. When this happens, it is of the utmost importance that you catch the leak early, even if it is only a small leak, because leaks of all sizes can, and do cause immense damage to property when they are left untreated.
Think we’re exaggerating? Water damage caused by plumbing failures cost approximately $14 billion each and every year. If you’re lucky, the insurance company will pay for your personal loses, but if not, poor plumbing could set you back thousands of dollars when it strikes. Not only that, but leaks cause a huge amount of water loss, which is bad for the environment and your home water bills.
Want to avoid the time and expense it takes to fix longstanding leaks? You need to invest in an automated water leak detection solution
If you’re looking for an affordable whole-home leak detection system, your best bet is to buy a few battery-powered leak alarms, which you can find at most hardware stores and home centers. These are very easy to use – you simply place the sensors on the ground near any pipes and plumbing fixtures, such as drains, heaters and, of course, washing machines, and leave them there to monitor the situation. As soon as even a small amount of water is detected by them, the water leak alarms will begin to admit an extremely loud and piercing sound that will undoubtedly attract your attention.
If you decide to use water leak alarms as your primary source of home leak detection, it’s a good idea to place at least one on your basement floor -if you have one – so that it can alert you if any water leaks in from the exterior of the home during storms or flooding, and also so that you get an early warning if your sump pump goes out. Not all flooding issues are caused by leaking pipes so we want to focus on all areas of the home that could be potential entry points for water to leak through.
Water leaks are a nuisance that can lead to expensive repairs and pose a serious risk to your home or business. These types of leaks are hidden more often than not, which means that they can cause extensive damage without you even realizing
Signs of a Hidden Water Leak
Some signs of water leaks are obvious, like a burst pipe in your attic. However, the most common type of water leak is a hidden one. Even if you don’t see water flowing across your attic or out the bottom of your toilet, you could still have a leak. It is important to be aware of the smaller, most frequently missed signs of a leak.
A few signs of a hidden leak include:
Damp spots on your carpets or in the yard
Musty odors in your home
Mold or mildew in your home
Discoloration on walls or ceilings
Increases in your water bill
Best Water Leak Detectors
Water damage is the second highest home insurance claim that costs on average $10,000 to remediate. Early detection with the help of water sensors help to reduce damage. Let’s look at these small, but mighty sensors that aid in keeping your home water free.
Features to Look for When Buying Water Leak Detectors
If you want your home’s water to be stopped at the first sign of a leak, look for water leak detectors with an automatic shut-off feature. As soon as the sensor detects water, it may sound an alarm, send you an alert, and stop your home’s water supply. While these water leak detectors can be more expensive, they can help you avoid even more costly repairs down the road.
Buying a water leak detector with temperature monitoring can warn you of freezing pipes. Frozen pipes can lead to bursting and repairs. Some water leak sensors with temperature monitoring can send an alert to your phone.
One last feature to look for when buying water leak detectors is access to a mobile app and alerts. Having an alarm that goes off while you’re home won’t help very much, but having an alarm you can check through your phone and receive alerts can keep you abreast of any leaks and temperature changes.
The Flume water monitoring system includes a battery-powered water leak detector that connects to your home’s water meter. You’ll be able to monitor your home’s water usage and detect leaks using the Flume smartphone app and your home’s Wi-Fi to receive instant mobile alerts if your sensor detects water
Water Leak Detection
Whether your home is old or new, leaks can occur whenever and wherever they want. Factors such as severe climate changes, soil conditions, ground movement, and even poor construction can contribute to unexpected pipe damage which, if left undetected, can have detrimental and potentially costly side effects.
Pinpointing a leak location may be extremely difficult to do on your own. That’s why you need a professional plumbing contractor like Service Plus to do it for you! Service Plus uses the newest technologies in leak location to not just solve your leakage problems, but also to save time and money.
What Leak Services Does Service Plus Offer?
Pipe leaks – Many water leaks originate inside of pipes. Service Plus has cutting-edge technology, experience, and training necessary to find and eliminate pipe leaks in your home or building.
Slab leaks – Slab leaks are some of the hardest to detect, but when you hire Service Plus, you can rest easy knowing they are able to do the job efficiently and effectively.
Wall and ceiling leaks – These leaks are often easy to find but not always straightforward to repair. When you need leak repairs in the Indianapolis area, we’re the company to call!
Rerouting water lines – Sometimes a leak reveals a larger issue with your plumbing system, and that problem will sometimes necessitate the rerouting of your water line.
What Causes Pipes to Leak?
Pipe leaks are one of the most common forms of water leaks in homes, and they can develop for myriad reasons, including:
Old, degrading piping infrastructure
Cracks caused by extreme weather conditions, especially if the weather causes water to freeze inside of them
Improper or failing connections between pipe segments
If you know or have a feeling that your home meets any of these conditions, it is a good idea to have a plumber evaluate your plumbing system before a leak occurs—as they say, an ounce of prevention is worth a pound of cure!
When Should I Get Leak Detection?
Leaks can be a messy and expensive plumbing problem, but they are usually easy to fix. One of the best ways to determine if you have a leak is through leak detection.
It’s possible to detect leaks on your own and many homeowners try this DIY leak detection method before calling a pro.
There are a few steps you can take to detect a leak in your home, including:
Check exterior hose bibbs to make sure one wasn’t left on.
Check toilets by placing a dye tablet or food coloring into the toilet take. If the color seeps into the bowl, you’ll need a flapper valve repair or replacement. You can check for a flushing leak by wedging toilet paper between the tank and the bowl and seeing if it stays dry during the flush.
Check faucets by turning them on one at a time, moving the faucet handle back and forth, and looking for leakage around the valve stem and faucet spout. Also check the drain piping under the sink for water.
Work drain plugs open and closed with the water running in baths and sinks, and check for leaks where they connect to the drain system.
Inspect the garbage disposal and dishwasher for leaks while each appliance is running.
Check the walls where pipes connect and look for moisture, sponginess, or discoloration.
Listen for a humming sound from your pipes. This is usually a good indication of water loss, which can occur through a fixture or outlet, or through a leakage point along the line.
Calling in the Pros
If your DIY inspection doesn’t put you at ease or you would rather a professional check for leaks right from the get-go, there are a few things to know. You’ll want to hire an experienced professional who can find your leak and help you repair it. This is a situation in which cutting corners can lead to property damage and greater expense long-term, so if you go with a pro, make sure you’re choosing someone qualified for the job.
Here’s what to consider when choosing a leak detection specialist:
Experience – Before hiring any leak detection or plumbing specialist, ask how long they have been in business, with what professional organizations they are affiliated, and if they have a staff or if it’s just one person running the show. It’s also a good idea to find out if they participate in continuing education about leak detection.